| To protect the weighing system
against the hot furnace and to minimize any system drift during long-term
measurements, the standard TG 209 F3 Tarsus is equipped with a thermostat.
To achieve a lower starting temperature the connection of a cooling
thermostat is highly recommended.
Linked to the optimal configuration using mass flow controllers (MFC),
a membrane pump can also be connected, enabling evacuation of the thermo-microbalance.
Thus, measurements in pure inert gas atmosphere (pyrolysis) are guaranteed.
There is a wide variety of different crucibles of aluminum oxide,
platinum, aluminum, graphite and fused silica available in different
sizes.
The automatic sample changer, ASC (in preparation), handles your
routine measurements in quality control. Day and night it works
for you to
free your time for other tasks, allowing you to make optimal use
of the TG
209 F3 Tarsus, even over the weekend. Of course, each sample can
be assigned a different measurement and evaluation program. Easy-to-understand
input
fields lead you through the programming of a series of measurements.
Unplanned analyses can also be inserted into a pre-programmed series
of measurements already in progress.
Top
Information
Request Form
Home
Methods
Products
Service
NETZSCH
Group
Last update:
05/10/2006
, Copyright © 2000 NETZSCH-Geraetebau
GmbH
|
